DTXC Bar length at the end is not loaded

• Relator: beatme
• Dono: yyagi
• Tipo: Bugs
• Estado: Fechado
• Componente: DTXCreator
• Marcos: 不具合確認・バグ修正
• Prioridade: 5 - Medium
• Gravidade: 5 - Medium
• Resolução: Fixed
• Arquivo: Nenhum

Details Responder

If the DTX that is loaded with DTXCreator has a Bar length item (channel 0x02) that comes later than the last chip that appears in DTXCreator, the program does not load the Bar length into the editor.
This results in losing the Bar length if the DTX is saved with DTXCreator.

Example: Chips in a DTX only continue until Bar 050, but to fine-tune the ending timing of the DTX, Bar 051 uses a Bar length of 0.5 (2 Beats). (With an 0xC2 "02" item to hide the bar/beat lines)

The fix for this is to load the Bar length and display all Bars up to (including) that Bar number. (Similar to loading a chip?)

Ticket History (3/5 Histories)

2013-12-16 13:42 Updated by: beatme

• New Ticket "DTXC Bar length at the end is not loaded" created

2013-12-16 22:10 Updated by: yyagi

• Resolução Update from Nenhum to Fixed
• Marco Update from (Nenhum) to 不具合確認・バグ修正
• Dono Update from (Nenhum) to yyagi
• Componente Update from (Nenhum) to DTXCreator

Comentário Responder

Sorry for your inconvenience.

I fixed it. Please try tp://yyagi.com/DTXC_32639.zip

2013-12-17 02:53 Updated by: beatme

Comentário Responder

Thanks for the fix, it works as intended now I think.

2013-12-17 08:29 Updated by: yyagi

Comentário Responder

It seems good. Thanks.

I'll close the ticket later.

2013-12-18 03:42 Updated by: yyagi

• Ticket Close date is changed to 2013-12-18 03:42
• Estado Update from Aberto to Fechado