Commit: c9a38ce6abf7d5f1c6a64237cead9b298d03c118 - qemu (git)

Commit MetaInfo

• Revisão: c9a38ce6abf7d5f1c6a64237cead9b298d03c118 (tree)
• Hora: 2020-03-06 19:04:58
• Autor: Paolo Bonzini <pbonzini@redh...>
• Commiter: Peter Maydell

Mensagem de Log

qemu-doc: remove indices other than findex

These indices are not well-maintained, and pandoc also chokes on the
directives. Just nuke them.

Signed-off-by: Paolo Bonzini <[e-mail]>
Reviewed-by: Peter Maydell <[e-mail]>
Reviewed-by: Alex Bennée <[e-mail]>
Tested-by: Alex Bennée <[e-mail]>
Signed-off-by: Peter Maydell <[e-mail]>
Message-id: [e-mail]
Message-id: [e-mail]
Reviewed-by: Peter Maydell <[e-mail]>
Signed-off-by: Peter Maydell <[e-mail]>

Mudança Sumário

• modified: docs/system/keys.texi
• modified: docs/system/monitor.texi
• modified: docs/system/mux-chardev.texi
• modified: docs/system/quickstart.texi
• modified: docs/system/target-arm.texi
• modified: docs/system/target-i386.texi
• modified: docs/system/target-m68k.texi
• modified: docs/system/target-mips.texi
• modified: docs/system/target-ppc.texi
• modified: docs/system/target-sparc.texi
• modified: docs/system/target-sparc64.texi
• modified: docs/system/target-xtensa.texi
• modified: qemu-doc.texi

Diff

--- a/docs/system/keys.texi
+++ b/docs/system/keys.texi
@@ -10,23 +10,18 @@ then the modifier is Ctrl-Alt-Shift (instead of Ctrl-Alt) and if you use
 
 @table @key
 @item Ctrl-Alt-f
-@kindex Ctrl-Alt-f
 Toggle full screen
 
 @item Ctrl-Alt-+
-@kindex Ctrl-Alt-+
 Enlarge the screen
 
 @item Ctrl-Alt--
-@kindex Ctrl-Alt--
 Shrink the screen
 
 @item Ctrl-Alt-u
-@kindex Ctrl-Alt-u
 Restore the screen's un-scaled dimensions
 
 @item Ctrl-Alt-n
-@kindex Ctrl-Alt-n
 Switch to virtual console 'n'. Standard console mappings are:
 @table @emph
 @item 1
@@ -38,14 +33,9 @@ Serial port
 @end table
 
 @item Ctrl-Alt
-@kindex Ctrl-Alt
 Toggle mouse and keyboard grab.
 @end table
 
-@kindex Ctrl-Up
-@kindex Ctrl-Down
-@kindex Ctrl-PageUp
-@kindex Ctrl-PageDown
 In the virtual consoles, you can use @key{Ctrl-Up}, @key{Ctrl-Down},
 @key{Ctrl-PageUp} and @key{Ctrl-PageDown} to move in the back log.
 

--- a/docs/system/monitor.texi
+++ b/docs/system/monitor.texi
@@ -1,6 +1,5 @@
 @node pcsys_monitor
 @section QEMU Monitor
-@cindex QEMU monitor
 
 The QEMU monitor is used to give complex commands to the QEMU
 emulator. You can use it to:

--- a/docs/system/mux-chardev.texi
+++ b/docs/system/mux-chardev.texi
@@ -12,26 +12,19 @@ you're using the default.
 
 @table @key
 @item Ctrl-a h
-@kindex Ctrl-a h
 Print this help
 @item Ctrl-a x
-@kindex Ctrl-a x
 Exit emulator
 @item Ctrl-a s
-@kindex Ctrl-a s
 Save disk data back to file (if -snapshot)
 @item Ctrl-a t
-@kindex Ctrl-a t
 Toggle console timestamps
 @item Ctrl-a b
-@kindex Ctrl-a b
 Send break (magic sysrq in Linux)
 @item Ctrl-a c
-@kindex Ctrl-a c
 Rotate between the frontends connected to the multiplexer (usually
 this switches between the monitor and the console)
 @item Ctrl-a Ctrl-a
-@kindex Ctrl-a Ctrl-a
 Send the escape character to the frontend
 @end table
 @c man end

--- a/docs/system/quickstart.texi
+++ b/docs/system/quickstart.texi
@@ -1,6 +1,5 @@
 @node pcsys_quickstart
 @section Quick Start
-@cindex quick start
 
 Download and uncompress a PC hard disk image with Linux installed (e.g.
 @file{linux.img}) and type:

--- a/docs/system/target-arm.texi
+++ b/docs/system/target-arm.texi
@@ -1,6 +1,5 @@
 @node ARM System emulator
 @section ARM System emulator
-@cindex system emulation (ARM)
 
 Use the executable @file{qemu-system-arm} to simulate a ARM
 machine. The ARM Integrator/CP board is emulated with the following

--- a/docs/system/target-i386.texi
+++ b/docs/system/target-i386.texi
@@ -1,6 +1,5 @@
 @node x86 (PC) System emulator
 @section x86 (PC) System emulator
-@cindex system emulation (PC)
 
 @menu
 * pcsys_devices::      Peripherals

--- a/docs/system/target-m68k.texi
+++ b/docs/system/target-m68k.texi
@@ -1,7 +1,5 @@
 @node ColdFire System emulator
 @section ColdFire System emulator
-@cindex system emulation (ColdFire)
-@cindex system emulation (M68K)
 
 Use the executable @file{qemu-system-m68k} to simulate a ColdFire machine.
 The emulator is able to boot a uClinux kernel.

--- a/docs/system/target-mips.texi
+++ b/docs/system/target-mips.texi
@@ -1,6 +1,5 @@
 @node MIPS System emulator
 @section MIPS System emulator
-@cindex system emulation (MIPS)
 
 @menu
 * recommendations_cpu_models_MIPS:: Supported CPU model configurations on MIPS hosts
@@ -126,7 +125,6 @@ MIPSnet network emulation
 
 @node nanoMIPS System emulator
 @subsection nanoMIPS System emulator
-@cindex system emulation (nanoMIPS)
 
 Executable @file{qemu-system-mipsel} also covers simulation of
 32-bit nanoMIPS system in little endian mode:

--- a/docs/system/target-ppc.texi
+++ b/docs/system/target-ppc.texi
@@ -1,6 +1,5 @@
 @node PowerPC System emulator
 @section PowerPC System emulator
-@cindex system emulation (PowerPC)
 
 Use the executable @file{qemu-system-ppc} to simulate a complete 40P (PREP)
 or PowerMac PowerPC system.

--- a/docs/system/target-sparc.texi
+++ b/docs/system/target-sparc.texi
@@ -1,6 +1,5 @@
 @node Sparc32 System emulator
 @section Sparc32 System emulator
-@cindex system emulation (Sparc32)
 
 Use the executable @file{qemu-system-sparc} to simulate the following
 Sun4m architecture machines:

--- a/docs/system/target-sparc64.texi
+++ b/docs/system/target-sparc64.texi
@@ -1,6 +1,5 @@
 @node Sparc64 System emulator
 @section Sparc64 System emulator
-@cindex system emulation (Sparc64)
 
 Use the executable @file{qemu-system-sparc64} to simulate a Sun4u
 (UltraSPARC PC-like machine), Sun4v (T1 PC-like machine), or generic

--- a/docs/system/target-xtensa.texi
+++ b/docs/system/target-xtensa.texi
@@ -1,6 +1,5 @@
 @node Xtensa System emulator
 @section Xtensa System emulator
-@cindex system emulation (Xtensa)
 
 Two executables cover simulation of both Xtensa endian options,
 @file{qemu-system-xtensa} and @file{qemu-system-xtensaeb}.

--- a/qemu-doc.texi
+++ b/qemu-doc.texi
@@ -62,17 +62,14 @@
 QEMU is a FAST! processor emulator using dynamic translation to
 achieve good emulation speed.
 
-@cindex operating modes
 QEMU has two operating modes:
 
 @itemize
-@cindex system emulation
 @item Full system emulation. In this mode, QEMU emulates a full system (for
 example a PC), including one or several processors and various
 peripherals. It can be used to launch different Operating Systems
 without rebooting the PC or to debug system code.
 
-@cindex user mode emulation
 @item User mode emulation. In this mode, QEMU can launch
 processes compiled for one CPU on another CPU. It can be used to
 launch the Wine Windows API emulator (@url{https://www.winehq.org}) or
@@ -127,7 +124,6 @@ accelerator is required to use more than one host CPU for emulation.
 
 @node QEMU System emulator
 @chapter QEMU System emulator
-@cindex system emulation
 
 @menu
 * pcsys_quickstart::   Quick start
@@ -163,7 +159,6 @@ accelerator is required to use more than one host CPU for emulation.
 
 @node QEMU System emulator targets
 @chapter QEMU System emulator targets
-@cindex system emulation (PC)
 
 QEMU is a generic emulator and it emulates many machines. Most of the
 options are similar for all machines. Specific information about the
@@ -200,46 +195,7 @@ various targets are mentioned in the following sections.
 
 @node Index
 @appendix Index
-@menu
-* Concept Index::
-* Function Index::
-* Keystroke Index::
-* Program Index::
-* Data Type Index::
-* Variable Index::
-@end menu
-
-@node Concept Index
-@section Concept Index
-This is the main index. Should we combine all keywords in one index? TODO
-@printindex cp
 
-@node Function Index
-@section Function Index
-This index could be used for command line options and monitor functions.
 @printindex fn
 
-@node Keystroke Index
-@section Keystroke Index
-
-This is a list of all keystrokes which have a special function
-in system emulation.
-
-@printindex ky
-
-@node Program Index
-@section Program Index
-@printindex pg
-
-@node Data Type Index
-@section Data Type Index
-
-This index could be used for qdev device names and options.
-
-@printindex tp
-
-@node Variable Index
-@section Variable Index
-@printindex vr
-
 @bye