• R/O
  • HTTP
  • SSH
  • HTTPS

List of commits

Tags
No Tags

Frequently used words (click to add to your profile)

javac++androidlinuxc#windowsobjective-ccocoa誰得qtpythonphprubygameguibathyscaphec計画中(planning stage)翻訳omegatframeworktwitterdomtestvb.netdirectxゲームエンジンbtronarduinopreviewer

RSS
Rev. Hora Autor
14b2337 rx-v20 rx-20190616 2019-06-16 22:31:41 Philippe Mathieu-Daudé

BootLinuxConsoleTest: Test the RX-Virt machine

Add two tests for the rx-virt machine, based on the recommended test
setup from Yoshinori Sato:
https://lists.gnu.org/archive/html/qemu-devel/2019-05/msg03586.html

- U-Boot prompt
- Linux kernel with Sash shell

These are very quick tests:

$ avocado run -t arch:rx tests/acceptance/boot_linux_console.py
JOB ID : 84a6ef01c0b87975ecbfcb31a920afd735753ace
JOB LOG : /home/phil/avocado/job-results/job-2019-05-24T05.02-84a6ef0/job.log
(1/2) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_rx_uboot: PASS (0.11 s)
(2/2) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_rx_linux: PASS (0.45 s)
RESULTS : PASS 2 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0

Tests can also be run with:

$ avocado --show=console run -t arch:rx tests/acceptance/boot_linux_console.py
console: U-Boot 2016.05-rc3-23705-ga1ef3c71cb-dirty (Feb 05 2019 - 21:56:06 +0900)
console: Linux version 4.19.0+ (yo-satoh@yo-satoh-debian) (gcc version 9.0.0 20181105 (experimental) (GCC)) #137 Wed Feb 20 23:20:02 JST 2019
console: Built 1 zonelists, mobility grouping on. Total pages: 8128
...
console: SuperH (H)SCI(F) driver initialized
console: 88240.serial: ttySC0 at MMIO 0x88240 (irq = 215, base_baud = 0) is a sci
console: console [ttySC0] enabled
console: 88248.serial: ttySC1 at MMIO 0x88248 (irq = 219, base_baud = 0) is a sci

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
Based-on: 20190517045136.3509-1-richard.henderson@linaro.org
"RX architecture support"

4569abb 2019-06-16 22:31:41 Yoshinori Sato

MAINTAINERS: Add RX

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190607091116.49044-18-ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

3aa2bca 2019-06-16 22:31:41 Yoshinori Sato

Add rx-softmmu

Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20190607091116.49044-17-ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
pick ed65c02993 target/rx: Add RX to SysEmuTarget
pick 01372568ae tests: Add rx to machine-none-test.c
[PMD: Squashed patches from Richard Henderson modifying
qapi/common.json and tests/machine-none-test.c]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

8a409a2 2019-06-16 22:31:41 Philippe Mathieu-Daudé

hw/registerfields.h: Add 8bit and 16bit register macros

Some RX peripheral using 8bit and 16bit registers.
Added 8bit and 16bit APIs.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190607091116.49044-11-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

de5b40c 2019-06-16 22:31:41 Yoshinori Sato

qemu/bitops.h: Add extract8 and extract16

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190607091116.49044-10-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

32ef57e 2019-06-16 22:31:41 Philippe Mathieu-Daudé

hw/rx: Restrict the RX62N microcontroller to the RX62N CPU core

While the VIRT machine can use different microcontrollers,
the RX62N microcontroller is tied to the RX62N CPU core.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

e0e706b 2019-06-16 22:31:41 Richard Henderson

hw/rx: Honor -accel qtest

Issue an error if no kernel, no bios, and not qtest'ing.
Fixes make check-qtest-rx: test/qom-test.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20190607091116.49044-16-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
We could squash this with the previous patch

9f6261c 2019-06-16 22:31:41 Yoshinori Sato

target/rx: Move rx_load_image to rx-virt.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

3628adf 2019-06-16 22:31:41 Yoshinori Sato

hw/rx: RX Target hardware definition

rx62n - RX62N cpu.
rx-virt - RX QEMU virtual target.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190607091116.49044-9-ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Use TYPE_RX62N_CPU, use #define for RX62N_NR_TMR/CMT/SCI,
renamed CPU -> MCU, device -> microcontroller]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
v19: Fixed typo (Peter Maydell)

cb74f1c 2019-06-16 22:31:41 Yoshinori Sato

hw/char: RX62N serial communication interface (SCI)

This module supported only non FIFO type.
Hardware manual.
https://www.renesas.com/us/en/doc/products/mpumcu/doc/rx_family/r01uh0033ej0140_rx62n.pdf

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190607091116.49044-8-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

970aca8 2019-06-16 22:31:41 Yoshinori Sato

hw/timer: RX62N internal timer modules

renesas_tmr: 8bit timer modules.
renesas_cmt: 16bit compare match timer modules.
This part use many renesas's CPU.
Hardware manual.
https://www.renesas.com/us/en/doc/products/mpumcu/doc/rx_family/r01uh0033ej0140_rx62n.pdf

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190607091116.49044-7-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

4a6d8d8 2019-06-16 22:31:40 Yoshinori Sato

hw/intc: RX62N interrupt controller (ICUa)

This implementation supported only ICUa.
Hardware manual.
https://www.renesas.com/us/en/doc/products/mpumcu/doc/rx_family/r01uh0033ej0140_rx62n.pdf

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190607091116.49044-6-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

a0d39a9 2019-06-16 22:31:40 Richard Henderson

target/rx: Dump bytes for each insn during disassembly

There are so many different forms of each RX instruction
that it will be very useful to be able to look at the bytes
to see on which path a bug may lie.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20190607091116.49044-24-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

3c3b98f 2019-06-16 22:31:40 Richard Henderson

target/rx: Collect all bytes during disassembly

Collected, to be used in the next patch.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20190607091116.49044-23-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

11a94c2 2019-06-16 22:31:40 Richard Henderson

target/rx: Emit all disassembly in one prt()

Many of the multi-part prints have been eliminated by previous
patches. Eliminate the rest of them.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20190607091116.49044-22-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

adb77a9 2019-06-16 22:31:40 Richard Henderson

target/rx: Use prt_ldmi for XCHG_mr disassembly

Note that the ld == 3 case handled by prt_ldmi is decoded as
XCHG_rr and cannot appear here.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20190607091116.49044-21-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

337c221 2019-06-16 22:31:40 Richard Henderson

target/rx: Replace operand with prt_ldmi in disassembler

This has consistency with prt_ri(). It loads all data before
beginning output. It uses exactly one call to prt() to emit
the full instruction.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20190607091116.49044-20-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

802fa09 2019-06-16 22:31:40 Richard Henderson

target/rx: Disassemble rx_index_addr into a string

We were eliding all zero indexes. It is only ld==0 that does
not have an index in the instruction. This also allows us to
avoid breaking the final print into multiple pieces.

Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20190607091116.49044-19-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

dcc029d 2019-06-16 22:31:40 Yoshinori Sato

target/rx: RX disassembler

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190607091116.49044-5-ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

55644f5 2019-06-16 22:31:40 Yoshinori Sato

target/rx: simplify rx_cpu_class_by_name

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

f76a9ea 2019-06-16 22:31:40 Yoshinori Sato

target/rx: Follow the change of tcg.

Add cpu-param.h
Remove CPU_COMMON
Use env_cpu

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

19b1a13 2019-06-16 22:29:04 Yoshinori Sato

target/rx: CPU definition

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190607091116.49044-4-ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Use newer QOM style, split cpu-qom.h, restrict access to
extable array, use rx_cpu_tlb_fill() extracted from patch of
Yoshinori Sato 'Convert to CPUClass::tlb_fill']
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

52b9481 2019-06-16 22:29:04 Yoshinori Sato

target/rx: TCG helper

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190607091116.49044-3-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Removed tlb_fill, extracted from patch of Yoshinori Sato
'Convert to CPUClass::tlb_fill']
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

f7b2cb5 2019-06-16 22:29:03 Yoshinori Sato

target/rx: TCG translation

This part only supported RXv1 instructions.
Instruction manual.
https://www.renesas.com/us/en/doc/products/mpumcu/doc/rx_family/r01us0032ej0120_rxsm.pdf

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190607091116.49044-2-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

f3d0bec 2019-06-14 22:46:13 Peter Maydell

Block patches:
- Allow blockdev-backup from nodes that are not in qemu's main AIO
context to newly added nodes
- Add salvaging mode to qemu-img convert
- Minor fixes to tests, documentation, and for less Valgrind annoyance
-----BEGIN PGP SIGNATURE-----

iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl0Do0MSHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9AYfAH/3Z4Ua5Pwown99TH57jdfHBzdWnhwQV6
fEJs1viFOufb9RS/3UB3JlPZ71Jf+4y97g9NrRY05BQ3ZJPwlm9moSdM7GPQ6Ni3
OVqHP6shnOHlBHI897JRDPjpLGEujIVk59EE9wB7e/T8rpGo21yJ91u5Ha4T9M2/
jsHwL/1NPCe8OxdCMSNJmIPA2PqouBjvEGdbCwa6sOVNe+pFJnhStEZOjnP+rmmb
wt5vk+NR40rdsuAoUZ7mTr0GhUDtJAL9vkJgW1uH7b9mzAsxklsWpct6oxDwEYJL
BURVLsT2g8QQwX7pebaOkys0ktPGkegtv785yh8KhPf2Yf6S8L1vS4M=
=o8kg
-----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-06-14' into staging

Block patches:
- Allow blockdev-backup from nodes that are not in qemu's main AIO
context to newly added nodes
- Add salvaging mode to qemu-img convert
- Minor fixes to tests, documentation, and for less Valgrind annoyance

# gpg: Signature made Fri 14 Jun 2019 14:38:11 BST
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40

* remotes/maxreitz/tags/pull-block-2019-06-14:
iotests: Test qemu-img convert -C --salvage
iotests: Test qemu-img convert --salvage
blkdebug: Inject errors on .bdrv_co_block_status()
blkdebug: Add "none" event
blkdebug: Add @iotype error option
qemu-img: Add salvaging mode to convert
qemu-img: Move quiet into ImgConvertState
blockdev: Overlays are not snapshots
qapi/block-core: Overlays are not snapshots
qemu-img: Fix options leakage in img_rebase()
iotests: restrict 254 to support only qcow2
hw/block/fdc: floppy command FIFO memory initialization
iotests: Fix intermittent failure in 219
iotests: Filter 175's allocation information
event_match: always match on None value
iotests: add iotest 256 for testing blockdev-backup across iothread contexts
iotests.py: rewrite run_job to be pickier
QEMUMachine: add events_wait method
iotests.py: do not use infinite waits
blockdev-backup: don't check aio_context too early

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

21c1ce5 2019-06-14 22:09:42 Max Reitz

iotests: Test qemu-img convert -C --salvage

We do not support this combination (yet), so this should yield an error
message.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190507203508.18026-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

0b1eb0c 2019-06-14 22:09:27 Max Reitz

iotests: Test qemu-img convert --salvage

This test converts a simple image to another, but blkdebug injects
block_status and read faults at some offsets. The resulting image
should be the same as the input image, except that sectors that could
not be read have to be 0.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190507203508.18026-7-mreitz@redhat.com
Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[mreitz: Dropped superfluous printf from _filter_offsets, as suggested
by Vladimir; disable test for VDI and IMGOPTSSYNTAX]
Signed-off-by: Max Reitz <mreitz@redhat.com>

1adb0b5 2019-06-14 21:16:57 Max Reitz

blkdebug: Inject errors on .bdrv_co_block_status()

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190507203508.18026-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

f8cec15 2019-06-14 21:16:57 Max Reitz

blkdebug: Add "none" event

Together with @iotypes and @sector, this can be used to trap e.g. the
first read or write access to a certain sector without having to know
what happens internally in the block layer, i.e. which "real" events
happen right before such an access.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190507203508.18026-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

16789db 2019-06-14 21:16:57 Max Reitz

blkdebug: Add @iotype error option

This new error option allows users of blkdebug to inject errors only on
certain kinds of I/O operations. Users usually want to make a very
specific operation fail, not just any; but right now they simply hope
that the event that triggers the error injection is followed up with
that very operation. That may not be true, however, because the block
layer is changing (including blkdebug, which may increase the number of
types of I/O operations on which to inject errors).

The new option's default has been chosen to keep backwards
compatibility.

Note that similar to the internal representation, we could choose to
expose this option as a list of I/O types. But there is no practical
use for this, because as described above, users usually know exactly
which kind of operation they want to make fail, so there is no need to
specify multiple I/O types at once. In addition, exposing this option
as a list would require non-trivial changes to qemu_opts_absorb_qdict().

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190507203508.18026-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>