Revisão | 1e8f1aff3cea72639bd50be54fb8b501ec0d2376 (tree) |
---|---|
Hora | 2020-07-26 18:21:27 |
Autor | Yoshinori Sato <ysato@user...> |
Commiter | Yoshinori Sato |
Add ap-rx72m-0a
@@ -0,0 +1,80 @@ | ||
1 | +/dts-v1/; | |
2 | +/ { | |
3 | + model = "Alphaproject AP-RX72M-0A"; | |
4 | + compatible = "alphaproject,ap-rx72m-0a"; | |
5 | + #address-cells = <1>; | |
6 | + #size-cells = <1>; | |
7 | + interrupt-parent = <&rxicu>; | |
8 | + | |
9 | + chosen { | |
10 | + stdout-path = "serial0:38400"; | |
11 | + }; | |
12 | + aliases { | |
13 | + serial0 = &sci2; | |
14 | + }; | |
15 | + | |
16 | + xclk: oscillator { | |
17 | + #clock-cells = <0>; | |
18 | + compatible = "fixed-clock"; | |
19 | + clock-frequency = <24000000>; | |
20 | + clock-output-names = "xtal"; | |
21 | + }; | |
22 | + iclk: iclk { | |
23 | + compatible = "renesas,rx-mul-clock"; | |
24 | + clocks = <&xclk>; | |
25 | + #clock-cells = <0>; | |
26 | + reg = <0x00080020 4>; | |
27 | + renesas,offset = <24>; | |
28 | + renesas,maxfreq = <100000000>; | |
29 | + }; | |
30 | + pclk: pclk { | |
31 | + compatible = "renesas,rx-mul-clock"; | |
32 | + clocks = <&xclk>; | |
33 | + #clock-cells = <0>; | |
34 | + reg = <0x00080020 4>; | |
35 | + renesas,offset = <8>; | |
36 | + renesas,maxfreq = <50000000>; | |
37 | + }; | |
38 | + bclk: bclk { | |
39 | + compatible = "renesas,rx-mul-clock"; | |
40 | + clocks = <&xclk>; | |
41 | + #clock-cells = <0>; | |
42 | + reg = <0x00080020 4>; | |
43 | + renesas,offset = <16>; | |
44 | + renesas,maxfreq = <50000000>; | |
45 | + }; | |
46 | + | |
47 | + cpus { | |
48 | + #address-cells = <1>; | |
49 | + #size-cells = <0>; | |
50 | + cpu@0 { | |
51 | + compatible = "renesas,rx"; | |
52 | + clock-frequency = <240000000>; | |
53 | + mem-cycle = <2>; | |
54 | + }; | |
55 | + }; | |
56 | + memory@08000000 { | |
57 | + device_type = "memory"; | |
58 | + reg = <0x08000000 0x01000000>; | |
59 | + }; | |
60 | + | |
61 | + rxicu: interrupt-controller@87000 { | |
62 | + compatible = "renesas,rx-icu"; | |
63 | + #interrupt-cells = <2>; | |
64 | + interrupt-controller; | |
65 | + reg = <0x00087000 0x600>; | |
66 | + }; | |
67 | + | |
68 | + mtu: timer@00088600 { | |
69 | + compatible = "renesas,rx-mtu2"; | |
70 | + reg = <0x00088600 0x600>; | |
71 | + clock-frequency = <46875>; | |
72 | + }; | |
73 | + | |
74 | + sci2: serial@0008a040 { | |
75 | + compatible = "renesas,scif"; | |
76 | + reg = <0x0008a040 8>; | |
77 | + interrupts = <214 0>, <215 0>, <216 0>, <217 0>; | |
78 | + clock = <60000000>; | |
79 | + }; | |
80 | +}; |
@@ -0,0 +1,9 @@ | ||
1 | +if TARGET_AP_RX72M | |
2 | + | |
3 | +config SYS_BOARD | |
4 | + default "alphaproject/ap_rx72m_0a" | |
5 | + | |
6 | +config SYS_CONFIG_NAME | |
7 | + default "ap_rx72m_0a" | |
8 | + | |
9 | +endif |
@@ -0,0 +1,21 @@ | ||
1 | +# | |
2 | +# Copyright (C) 2014 Yoshinori Sato | |
3 | +# | |
4 | +# u-boot/board/hokuto/HSBRX63NC/Makefile | |
5 | +# | |
6 | +# This program is free software; you can redistribute it and/or | |
7 | +# modify it under the terms of the GNU General Public License as | |
8 | +# published by the Free Software Foundation; either version 2 of | |
9 | +# the License, or (at your option) any later version. | |
10 | +# | |
11 | +# This program is distributed in the hope that it will be useful, | |
12 | +# but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | +# GNU General Public License for more details. | |
15 | +# | |
16 | +# You should have received a copy of the GNU General Public License | |
17 | +# along with this program; if not, write to the Free Software | |
18 | +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
19 | +# MA 02111-1307 USA | |
20 | + | |
21 | +obj-y := ap_rx72m_0a.o lowlevel_init.o |
@@ -0,0 +1,94 @@ | ||
1 | +/* | |
2 | + * Copyright (C) 2015 Yoshinori Sato | |
3 | + * (C) Copyright 2000-2003 | |
4 | + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | |
5 | + * | |
6 | + * board/hokuto/HSBRX63N/hsbrx63n.c | |
7 | + * | |
8 | + * This program is free software; you can redistribute it and/or | |
9 | + * modify it under the terms of the GNU General Public License as | |
10 | + * published by the Free Software Foundation; either version 2 of | |
11 | + * the License, or (at your option) any later version. | |
12 | + * | |
13 | + * This program is distributed in the hope that it will be useful, | |
14 | + * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | + * GNU General Public License for more details. | |
17 | + * | |
18 | + * You should have received a copy of the GNU General Public License | |
19 | + * along with this program; if not, write to the Free Software | |
20 | + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
21 | + * MA 02111-1307 USA | |
22 | + */ | |
23 | + | |
24 | +#include <common.h> | |
25 | +#include <mmc.h> | |
26 | +#include <spi.h> | |
27 | +#include <netdev.h> | |
28 | +#include <asm/io.h> | |
29 | +#include <asm/processor.h> | |
30 | +#include <asm/sections.h> | |
31 | +#include <linux/usb/r8a66597.h> | |
32 | + | |
33 | +#define PRCR *(volatile unsigned short *)0x000803fe | |
34 | +#define PFAOE0 *(volatile unsigned char *)0x0008c104 | |
35 | +#define PFBCR0 *(volatile unsigned char *)0x0008c106 | |
36 | +#define PFBCR1 *(volatile unsigned char *)0x0008c107 | |
37 | +#define PFBCR2 *(volatile unsigned char *)0x0008c108 | |
38 | +#define PFBCR3 *(volatile unsigned char *)0x0008c100 | |
39 | +#define PORTA_DSCR *(volatile unsigned char *)0x0008c0ea | |
40 | +#define PORTB_DSCR *(volatile unsigned char *)0x0008c0eb | |
41 | +#define PORTD_DSCR *(volatile unsigned char *)0x0008c0ed | |
42 | +#define PORTE_DSCR *(volatile unsigned char *)0x0008c0ee | |
43 | +#define SYSCR0 *(volatile unsigned short *)0x00080006 | |
44 | +#define SDIR *(volatile unsigned short *)0x00083c24 | |
45 | +#define SDSR *(volatile unsigned char *)0x00083c50 | |
46 | +#define SDMOD *(volatile unsigned short *)0x00083c48 | |
47 | +#define SDTR *(volatile unsigned long *)0x00083c44 | |
48 | +#define SDADR *(volatile unsigned char *)0x00083c40 | |
49 | +#define SDRFCR *(volatile unsigned short *)0x00083c14 | |
50 | +#define SDRFEN *(volatile unsigned char *)0x00083c16 | |
51 | +#define SDCR *(volatile unsigned char *)0x00083c00 | |
52 | + | |
53 | +static void sdram_init(void) | |
54 | +{ | |
55 | + int w; | |
56 | + | |
57 | + PRCR = 0xa503; | |
58 | + PFAOE0 = 0xff; | |
59 | + PFBCR0 = 0x11; | |
60 | + PFBCR1 = 0xd0; | |
61 | + PFBCR2 = 0x00; | |
62 | + PFBCR3 = 0xc0; | |
63 | + | |
64 | + PORTA_DSCR = 0xff; | |
65 | + PORTB_DSCR = 0xff; | |
66 | + PORTD_DSCR = 0xff; | |
67 | + PORTE_DSCR = 0xff; | |
68 | + SYSCR0 = 0x5a03; | |
69 | + for (w = 0; w < 0x10000; w++); | |
70 | + | |
71 | + SDIR = 0x0020; | |
72 | + while (SDSR != 0); | |
73 | + SDIR |= 0x0001; | |
74 | + while (SDSR != 0); | |
75 | + SDMOD = 0x230; | |
76 | + SDTR= 0x0031303; | |
77 | + SDADR = 0x01; | |
78 | + SDRFCR = 0x74e1; | |
79 | + SDRFEN |= 0x01; | |
80 | + SDCR |= 0x01; | |
81 | + | |
82 | + memset(__bss_start, 0, (void *)&__bss_end - (void *)__bss_start); | |
83 | +} | |
84 | + | |
85 | +#define P12PFS *(volatile unsigned char *)0x0008c14a | |
86 | +#define P13PFS *(volatile unsigned char *)0x0008c14b | |
87 | + | |
88 | +int board_early_init_f(void) | |
89 | +{ | |
90 | + P12PFS = 0x0a; | |
91 | + P13PFS = 0x0a; | |
92 | + sdram_init(); | |
93 | + return 0; | |
94 | +} |
@@ -0,0 +1,92 @@ | ||
1 | +/* | |
2 | + * (C) Copyright 2020 Yoshinori Sato | |
3 | + * | |
4 | + * This program is free software; you can redistribute it and/or | |
5 | + * modify it under the terms of the GNU General Public License as | |
6 | + * published by the Free Software Foundation; either version 2 of | |
7 | + * the License, or (at your option) any later version. | |
8 | + * | |
9 | + * This program is distributed in the hope that it will be useful, | |
10 | + * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
11 | + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
12 | + * GNU General Public License for more details. | |
13 | + * | |
14 | + * You should have received a copy of the GNU General Public License | |
15 | + * along with this program; if not, write to the Free Software | |
16 | + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
17 | + * MA 02111-1307 USA | |
18 | + */ | |
19 | + | |
20 | +#include <config.h> | |
21 | +#include <version.h> | |
22 | + | |
23 | +#include <asm/processor.h> | |
24 | + | |
25 | +#define PRCR 0x3fe | |
26 | +#define CKOCR 0x3e | |
27 | +#define HOCOCR 0x36 | |
28 | +#define HOCOPCR 0xc294 | |
29 | +#define MOFCR 0x8c293 | |
30 | +#define MOSCWTCR 0xa2 | |
31 | +#define MOSCCR 0x32 | |
32 | +#define OSCOVFSR 0x3c | |
33 | +#define PLLCR 0x28 | |
34 | +#define PLLCR2 0x2a | |
35 | +#define SCKCR 0x20 | |
36 | +#define SCKCR2 0x24 | |
37 | +#define SCKCR3 0x26 | |
38 | +#define MEMWAIT 0x101c | |
39 | +/* PLL out:x10 PLL source:osc in: 24MHz = 240MHz */ | |
40 | +#define PLLCR_VAL (0x13 << 8) | (0x00 << 4) | (0x00 << 0) | |
41 | +/* ICK=1 / PCKA = 2 / PCKB-D = 4 / FCK = 4 / BCK = 3 / UCK = 5 */ | |
42 | +#define SCKCR_VAL \ | |
43 | + (2 << 28) | (0 << 24) | (1 << 22) | (9 << 16) | \ | |
44 | + (1 << 12) | (2 << 8) | (2 << 4) | (2 << 4) | |
45 | + | |
46 | + .global lowlevel_init | |
47 | + | |
48 | + .text | |
49 | + .align 2 | |
50 | + | |
51 | +lowlevel_init: | |
52 | + mov.l #0x00080000, r1 | |
53 | + /* clock register unlock */ | |
54 | + add #PRCR, r1, r2 | |
55 | + mov.w #0xa50b, [r2] | |
56 | + /* CLKOUT - main clock / output disable */ | |
57 | + mov.w #(1 << 15) | (2 << 8), CKOCR[r1] | |
58 | + /* HOCO off */ | |
59 | + mov.b #0x01, HOCOCR[r1] | |
60 | + add #HOCOPCR, r1, r2 | |
61 | + mov.b #0x01, [r2] | |
62 | + /* Main OSC enable */ | |
63 | + add #MOFCR, r1, r2 | |
64 | + mov.b #0, [r2] | |
65 | + add #MOSCWTCR, r1, r2 | |
66 | + mov.b #0x53, [r2] | |
67 | + add #MOSCCR, r1, r2 | |
68 | + mov.b #0, [r2] | |
69 | +1: mov.b [r2], r3 | |
70 | + cmp #0, r3 | |
71 | + bne 1b | |
72 | + /* Wait for main OSC stable */ | |
73 | +2: btst #0, OSCOVFSR[r1].b | |
74 | + beq 2b | |
75 | + mov.w #PLLCR_VAL, PLLCR[r1] | |
76 | + mov.b #0x00, PLLCR2[r1] | |
77 | + /* Wait for PLL stable */ | |
78 | +3: btst #2, OSCOVFSR[r1].b | |
79 | + beq 3b | |
80 | + mov.l #SCKCR_VAL, SCKCR[r1] | |
81 | + mov.w #(4 << 4) | 0x0001, SCKCR2[r1] | |
82 | + /* 1 wait */ | |
83 | + add #MEMWAIT, r1, r2 | |
84 | + mov.b #0x01, [r2] | |
85 | +4: mov.b [r2], r3 | |
86 | + cmp #1,r3 | |
87 | + bne 4b | |
88 | + /* Source PLL */ | |
89 | + mov.w #(4 << 8), SCKCR3[r1] | |
90 | + rts | |
91 | + | |
92 | + .end |
@@ -0,0 +1,94 @@ | ||
1 | +/* | |
2 | + * Copyright (C) 2015 Yoshinori Sato | |
3 | + * | |
4 | + * See file CREDITS for list of people who contributed to this | |
5 | + * project. | |
6 | + * | |
7 | + * This program is free software; you can redistribute it and/or | |
8 | + * modify it under the terms of the GNU General Public License as | |
9 | + * published by the Free Software Foundation; either version 2 of | |
10 | + * the License, or (at your option) any later version. | |
11 | + * | |
12 | + * This program is distributed in the hope that it will be useful, | |
13 | + * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | + * GNU General Public License for more details. | |
16 | + * | |
17 | + * You should have received a copy of the GNU General Public License | |
18 | + * along with this program; if not, write to the Free Software | |
19 | + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
20 | + * MA 02111-1307 USA | |
21 | + */ | |
22 | + | |
23 | +#include <config.h> | |
24 | +OUTPUT_FORMAT("elf32-rx-linux") | |
25 | +OUTPUT_ARCH(rx) | |
26 | +ENTRY(_start) | |
27 | + | |
28 | +MEMORY { | |
29 | + iram : ORIGIN = 0x0000100, LENGTH = 512K - 256 | |
30 | + sdram : ORIGIN = 0x08000000, LENGTH = 16M | |
31 | + irom : ORIGIN = 0xfffc0000, LENGTH = 256K - 128 | |
32 | + vector : ORIGIN = 0xffffff80, LENGTH = 128 | |
33 | +} | |
34 | + | |
35 | +SECTIONS | |
36 | +{ | |
37 | + .text : | |
38 | + { | |
39 | + PROVIDE (_ftext = .); | |
40 | + PROVIDE (_fcode = .); | |
41 | + PROVIDE (_start = .); | |
42 | + | |
43 | + KEEP(arch/rx/cpu/rxv2/start.o (.text)) | |
44 | + *(.text) | |
45 | + . = ALIGN(4); | |
46 | + PROVIDE (_ecode = .); | |
47 | + } > irom | |
48 | + .rodata : | |
49 | + { | |
50 | + *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) | |
51 | + . = ALIGN(4); | |
52 | + } > irom | |
53 | + .u_boot_list : { | |
54 | + KEEP(*(SORT(.u_boot_list*))); | |
55 | + } > irom | |
56 | + PROVIDE (_etext = .); | |
57 | + | |
58 | + . = 0xffffff80; | |
59 | + .vector : | |
60 | + { | |
61 | + *(.vector); | |
62 | + } > vector | |
63 | + | |
64 | + PROVIDE (__ram_vec = 0x00000000); | |
65 | + | |
66 | + .data : | |
67 | + { | |
68 | + PROVIDE (_fdata = .); | |
69 | + *(.data) | |
70 | + *(.stack) | |
71 | + . = ALIGN(4); | |
72 | + PROVIDE (_edata = .); | |
73 | + } > iram AT>irom | |
74 | + _iram_start = _etext + SIZEOF(.data); | |
75 | + .iram.text : | |
76 | + { | |
77 | + _iram_text = .; | |
78 | + *(.iram.text) | |
79 | + _iram_text_end = .; | |
80 | + } > iram AT>irom | |
81 | + | |
82 | + .bss : | |
83 | + { | |
84 | + PROVIDE (__bss_start = .); | |
85 | + *(.bss*) | |
86 | + . = ALIGN(4); | |
87 | + } > iram | |
88 | + PROVIDE (__bss_end = .); | |
89 | + PROVIDE (__init_end = .); | |
90 | + | |
91 | + PROVIDE (__stack = 0x00040000); | |
92 | + | |
93 | + PROVIDE (_end = .); | |
94 | +} |
@@ -0,0 +1,7 @@ | ||
1 | +CONFIG_RX=y | |
2 | +CONFIG_SYS_TEXT_BASE=0xfffc0000 | |
3 | +CONFIG_TARGET_AP_RX72M=y | |
4 | +CONFIG_OF_CONTROL=y | |
5 | +# CONFIG_NET is not set | |
6 | +CONFIG_TIMER=y | |
7 | +CONFIG_RX_TIMER=y |
@@ -0,0 +1,97 @@ | ||
1 | +/* | |
2 | + * Configuation settings for AP-RX64M-0A | |
3 | + * | |
4 | + * Copyright (C) 2011 Yoshinori Sato | |
5 | + * | |
6 | + * See file CREDITS for list of people who contributed to this | |
7 | + * project. | |
8 | + * | |
9 | + * This program is free software; you can redistribute it and/or | |
10 | + * modify it under the terms of the GNU General Public License as | |
11 | + * published by the Free Software Foundation; either version 2 of | |
12 | + * the License, or (at your option) any later version. | |
13 | + * | |
14 | + * This program is distributed in the hope that it will be useful, | |
15 | + * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
16 | + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
17 | + * GNU General Public License for more details. | |
18 | + * | |
19 | + * You should have received a copy of the GNU General Public License | |
20 | + * along with this program; if not, write to the Free Software | |
21 | + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
22 | + * MA 02111-1307 USA | |
23 | + */ | |
24 | + | |
25 | +#ifndef __AP_RX64M_0A_H | |
26 | +#define __AP_RX64M_0A_H | |
27 | + | |
28 | +/* SCI */ | |
29 | +#define CONFIG_SCIF_A 1 | |
30 | +#define CONFIG_SCIF_CONSOLE 1 | |
31 | +#define CONFIG_CONS_SCIF2 1 | |
32 | + | |
33 | +/* memory */ | |
34 | +#define CONFIG_SYS_SRAM_BASE 0x00000000 | |
35 | +#define CONFIG_SYS_SRAM_SIZE 0x00080000 | |
36 | +#define CONFIG_SYS_SDRAM_BASE 0x08000000 | |
37 | +#define CONFIG_SYS_SDRAM_SIZE (16 * 1024 * 1024) | |
38 | +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE | |
39 | +#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_SDRAM_SIZE | |
40 | +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_MEMTEST_START + 0x100000) | |
41 | +#define CONFIG_SYS_MONITOR_BASE 0x8000 /*(CONFIG_SYS_SDRAM_BASE)*/ | |
42 | +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) | |
43 | +#define CONFIG_SYS_MALLOC_LEN (64 * 1024) | |
44 | +#define CONFIG_SYS_GBL_DATA_SIZE 256 | |
45 | +#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) | |
46 | +#define CONFIG_SYS_MAX_FLASH_SECT 128 | |
47 | +#define CONFIG_SYS_MAX_FLASH_BANKS 3 | |
48 | +#define CONFIG_SYS_FLASH_PROTECTION | |
49 | +#define CONFIG_SYS_FLASH_SIZE 0x00400000 | |
50 | + | |
51 | +#define CONFIG_SYS_CLK_FREQ 240000000 | |
52 | +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ | |
53 | +#define CONFIG_SYS_HZ 1000 | |
54 | + | |
55 | +#if defined(CONFIG_CMD_NET) | |
56 | +#define CONFIG_SH_ETHER 1 | |
57 | +#define CONFIG_SH_ETHER_USE_PORT (0) | |
58 | +#define CONFIG_SH_ETHER_PHY_ADDR (0x00) | |
59 | +#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII | |
60 | +#define CONFIG_MII 1 | |
61 | +#define CONFIG_BITBANGMII 1 | |
62 | +#define CONFIG_BITBANGMII_MULTI 1 | |
63 | +#define CONFIG_PHYLIB 1 | |
64 | +#define CONFIG_PHY_SMSC 1 | |
65 | +#endif | |
66 | + | |
67 | +#if defined(CONFIG_CMD_USB) | |
68 | +#define CONFIG_USB_R8A66597_HCD | |
69 | +#define CONFIG_R8A66597_BASE_ADDR 0x000a0200 | |
70 | +#define CONFIG_R8A66597_ENDIAN 0x0000 /* little */ | |
71 | +#define CONFIG_SUPERH_ON_CHIP_R8A66597 | |
72 | +#define CONFIG_R8A66597_VBUS_NEG | |
73 | +#define CONFIG_USB_STORAGE | |
74 | +#endif | |
75 | + | |
76 | +#if 0 | |
77 | +#define CONFIG_USB_GADGET | |
78 | +#define CONFIG_USB_GADGET_R8A66597 | |
79 | +#define CONFIG_R8A66597_UDC_BASE 0x000a0000 | |
80 | +#define CONFIG_USB_GADGET_SERIAL | |
81 | +#define CONFIG_USB_TTY_CDC | |
82 | +#endif | |
83 | + | |
84 | +#if defined(CONFIG_CMD_MMC_SPI) || defined(CONFIG_CMD_SPI) | |
85 | +#define CONFIG_RX_RSPI | |
86 | +#define CONFIG_RSPI_BASE 0x000883a0 | |
87 | +#define CONFIG_RSPI_CLK CONFIG_SYS_CLK_FREQ | |
88 | +#endif | |
89 | +#if defined(CONFIG_CMD_MMC_SPI) | |
90 | +#define CONFIG_MMC | |
91 | +#define CONFIG_MMC_SPI | |
92 | +#define CONFIG_GENERIC_MMC | |
93 | +#endif | |
94 | + | |
95 | +/*#define CONFIG_RXRTC*/ | |
96 | + | |
97 | +#endif |