Software Map

CrystalDisklnfo is disk utility that supports some types of USB connections, Intel RAID, and NVMe. If anything abnormal is detected, it will notify you by text or voice message, and it supports both HDD and SSD. In addition to information like model number, volume, buffer size, it obtains S.M.A.R.T. information such as how many times the power was turned on, the time length of use, and temperature to monitor the state of the disk.

• Important Notice

Both CrystalDiskInfo and CrystalDiskMark are open source software personally developed by me. Any software development demands huge amount of time and effort, and on top of that, new hardware devices are released one after another which becomes a necessity to purchase in order to support them. Therefore, this project needs more development funds. As to current status, this project is extremely short of funds and is in desperate need of your donations.

If you want to contribute to supporting the continuance of this project, please make donations by Paypal. Please make the amount of each contribution $10 USD or more (in JPYen, 1000Yen or more) if possible. Your contributions will be deeply appreciated.

CrystalDiskMark is benchmark software that measures the transfer speed of media data storage drive such as HD, SSD, USB memory, SD card and NAS.

• Important Notice

Both CrystalDiskInfo and CrystalDiskMark are open source software personally developed by me. Any software development demands huge amount of time and effort, and on top of that, new hardware devices are released one after another which becomes a necessity to purchase in order to support them. Therefore, this project needs more development funds. As to current status, this project is extremely short of funds and is in desperate need of your donations.

If you want to contribute to supporting the continuance of this project, please make donations by Paypal. Please make the amount of each contribution $10 USD or more (in JPYen, 1000Yen or more) if possible. Your contributions will be deeply appreciated.

This editor can directly edit property files written in Unicode reference characters, eliminating the need to convert to Unicode. In addition to the usual editor functions, it can also be used as an Eclipse plug-in.

Clonezilla is a partition and disk imaging/cloning program similar to True Image®. It saves and restores only used blocks in hard drive. Two types of Clonezilla are available, Clonezilla live and Clonezilla SE (Server Edition).

* Filesystem supported: ext2, ext3, ext4, reiserfs, xfs, jfs of GNU/Linux, FAT, NTFS of MS Windows, HFS+ of Mac OS, UFS of BSD, minix of Minix and VMFS of VMWare ESX. Therefore you can clone GNU/Linux, MS windows and Intel-based Mac OS, no matter it's 32-bit (x86) or 64-bit (x86-64) OS. For these file systems, only used blocks in partition are saved and restored. For unsupported file system, sector-to-sector copy is done by dd in Clonezilla * LVM2 (LVM version 1 is not) under GNU/Linux is supported. * Multicast is supported in Clonezilla SE, which is suitable for massive clone.

For more info about Clonezilla, including usage, installation and forum, please visit this website: https://clonezilla.org

TortoiseSVN is a Subversion (SVN) client, implemented as a windows shell extension. Which means it's available right where you need it: in the Windows file explorer.

It's intuitive and easy to use, since it doesn't require the Subversion command line client to run. Simply the coolest Interface to (Sub)Version Control!

This is a project to port Android open source project to x86 platform, formerly known as "patch hosting for android x86 support". http://www.android-x86.org/

The original plan is to host different patches for android x86 support from open source community. A few months after we created the project, we found out that we could do much more than just hosting patches. So we decide to create our code base to provide support on different x86 platforms, and set up a git server to host it.

This is an open source project licensed under Apache Public License 2.0. Some components are licensed under GNU General Public License (GPL) 2.0 or later.

Tera Term is Tera Term Pro 2.3 succession version and is being officially recognized by the original author. Tera Term is open source free software terminal emulator supporting UTF-8 protocol. Now TTSSH supports SSH2 protocol (Original version supports SSH1).

Prepare a live environment and installer for the Japanese version of Manjaro Linux (https://manjaro.org/ ). Specifically

1.Standard installation of Japanese input (fcitx5-mozc) 2.Standard installation of Japanese fonts (including pictograms) 3.Enable Japanese input and display in the live environment. Enable Japanese input and display in a live environment, even when booting from a USB memory stick or other device. 4.The kernel is 6.2(mainline) series. 5.The flatpak version Firefox(https://www.mozilla.org/ja/firefox/browsers/ ) or Floorp(https://floorp.ablaze.one/ ) is used as the standard browser.(2022.10.25-)

KDE,xfce and GNOME will be available for official use.

[manjaro-jp]
SigLevel = Optional TrustAll
Server = https://osdn.net/projects/manjaro-jp/storage/manjaro-jp/

https://gitlab.com/phoepsilonix/Manjaro-jp/ https://github.com/phoepsilonix/Manjaro-jp https://sourceforge.net/projects/manjaro-jp/

(GPG signing public key:536487F1470D7187) <phoepsilonix at gmail dot com>

VLゴシックフォントファミリは、

• M+ FONTS PROJECT による M+1C および M+1M フォントを英数字、かな、および一部の漢字(教育漢字を含む約1870文字)に使用
• 不足部分の一部(約2279文字...

WinMergeの日本語版です。 日本語マニュアルや日本語に特化した機能の開発を行います。

Simple, lightweight but featureful, and easy-to-use e-mail client. It provides intuitive user-interface and fast operation.

M+ FONTS are a font family under the Free license. You can use, copy, and distribute it, with or without modification, either commercially and noncommercially.